The project is aimed at studying a very specific typology of archaeological finds, called the ‘Tavolette enigmatiche’ or ‘Brotlaibidole’. The activity developed at the OPTOLAB focused on (i) the optical 3D acquisition  of the pieces, (ii) the creation of 3D meshes, and (iii) the study of the occurrences and of the morphological signs impressed on them.

download the video clip ! (10 MB file)

Download the models from this selection! Download here the STL viewer [25MB].

Download the models!
(Vienna) Gaweimstal [4MB]
(Vienna) Grosshoflein [5MB]
(Bratislava) Vesele Hradok [10MB]
(Asparn) Absdorf [9MB]
(Brescia) st14321 – Lucone 58 [6MB]
(Brescia) A361 – Desenzano [6MB]

This work is part of a larger activity that involves a number of partners. These are the Regione Lombardia (A.M. Ravagnan), the Provincia di Mantova (T. Grizzi), the Comune di Cavriana (B. Righetti), the Museo Archeologico dell’Alto Mantovano (A. Piccoli), the Università di Verona (S. Marchesini).

The ‘Brotlaibidole’ are small baked-clay objects of prevalently ovoid shape of the 2,100-1,400 B.C. periods, engraved with symbols and drilled holes whose meaning is still unknown.

Their presence in Italy and in many countries in the northeast Europe represents an ‘enigma’ for the specialists. The reason is that the shape and the orientation of the signs is very similar among the objects, even if they have been found in different geographical sites.

Hence, we have been required to accomplish an extensive measurement campaign in Europe, and to produce and collect the 3D models in a unique database, in view of their future study by the specialists. To carry out the measurement, we used the Vivid 910 sensor (Konica Minolta Inc.). Besides the measurement performances, that well suit to the resolutions required in this application, the system is rugged, portable, and fast in the setup and the acquisition processes. So far, 30 specimens have been acquired, modeled and organized in a database. Their resolution is 120μm.

tav_goals.jpg tav_vivid.jpg
tav_models_1.jpg tav_models_2.jpg

Following the acquisition and point-cloud elaboration, we carried out a selection of symbols to be compared. The different symbols were extracted from the models and properly oriented in a suitable reference frame.

tav_symbol_selection.jpg tav_symbol_models.jpg

Symbols from different “pieces” were then superimposed and aligned, in a totally automatic way.

tav_symbol_analysis.jpg tav_symbol_alignment.jpg
tav_symbol_superp.jpg tav_symbol_dist-eval.jpg

Color coding was used as a user-friendly way to obtain information about the amount of overlapping between the two symbols. All these steps were performed by the self developed “ATEC-3D” software: a user-friendly environment, specifically intended to be used by a non software expert such as an archaeologist.

tav_atec_interf.jpg tav_atec_validation.jpg

In the ATEC-3D panel, the signs to be compared are chosen, and they appear as 3D models. Point clouds and their superposition in color coding are presented after suitable automatic registration and distance compensation. An index of similarity (rms value of the differences) is obtained to quantitatively assess the goodness of overlapping.

This process has been tested on a suitable number of self-made signs used as references, printed onto clay surfaces under different angles and with different pressures.

tav_copies.jpg tav_engraves.jpg
tav_impression.jpg tav_results.jpg

The ATEC-3D software has been delivered to the archaeologists, who have now started the overall comparison of all signs derived from the 30 models, whose 3D acquisition has been made and whose signs are now in the common database.